原硬盘已坏，不知怎么弄COMS
机箱上有Compaq prolinea 466字样不过具体型号看不懂，查不到资料，主机自带8M内纯，4条内纯插槽，三PCI插槽，5个ISA插槽，应该是1994的产品
看出来的回个贴，在问下了BIOS是不是还要放再硬盘上，知道的请具体讲下怎么操作，谢了
http://www.icare.hp.com.cn/TechCenter_StaticArticle/10371/10371.html
http://h20000.www2.hp.com/bizsupport/TechSupport/ProdSearch.jsp?lang=en&cc=us&taskId=135&prod=prolinea
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodSeriesId=96437&prodTypeId=12454
上面三个网址是相关的搜索，不知是哪个机型

机上贴了好几个55035的标签

CPU  INTEL  DX20DPR66 C4420504 SZ904（不知是不是原装机的）

SGRK8BLWBG01/03
172028-002
AP22K 9501
KOREA
COMPAQ

CIRRUS LOGIC
CL-GD5434-QC-D
40251-411DN
9510 J
KOREA-B

S9452AC
COMPAQ
129382-005
NSC T2

172027-001
COMPAQ
CF64010PCM
N 52A811W

172030-002
COMPAQ
CF64538APCM
N 52ADDRW

172029-002
COMPAQ
CF64659APCM
N 52AEELW

MF355F-490UC  S/N M798426(软驱）

汗，94年的电脑，那时候我连电脑都没见过。。。。应该先确定一下主板的芯片组吧。

bios不是存储在cmos上面的么？和硬盘没什么关系吧。

可以看看下面这个文章：
http://www.digimate.com.cn/biosfaq.htm

果然:)
古董机就是不一样。

bios做法：

Quote:

You can download the F10 setup from this site... http://h18007.www1.hp.com/support/files/prolinea/us/locate/3_16.html . You can enter it from a floppy, which is what I do on a Compaq of similar age. You can also download and create a disk that will write it to the hard drive, but the hard drive has to be totally clean...not even a partition present in order to do that. It will then install a non-DOS partition that contains the F10 setup.

Quote:

Compaq's of this type actually put a good part of the BIOS in the 'Diagnostic Partition'. These machines are a major nightmare to work on. You need a set of several diskettes to re-create this partition if it does not exist, and even then your chances of success are not all that good. The diskettes are normally created with the F10 setup BEFORE you exchange hard drives or delete the partitions. You can create them using Compaq's downloadable utilities, the trick is to get the correct ones for your exact model. Good luck on this. The last Compaq I tried it on would simply not let me create the Diagnostic Partition, even though I had the correct setup diskettes and softpaqs.

这也有个硬件列表：
http://myweb.tiscali.co.uk/mickfrench/compaqpro.htm

好像不用软驱也可以，可以远程的，有文档，不过我看不大懂：
http://www.compaq.com/support/files/server/us/webdoc/rom/RemoteROMUser-001.pdf

更多：http://www.google.cn/search?complete=1&hl=zh-CN&q=Compaq+ROMPaq&meta=